Chemical Dosing Water Treatment

By measuring clean water from 3.5” stainless steel pipe, the end user is able to control a pump.  The pump adds water treatment chemicals to the water variably based on the 4-20 output signal controlling it.


 

 

U1000

First, grease the transducers and clamp on the guide rail base to the pipe.


U1000

Move the transducers to the prescribed letter and number as dictated by the electronic head after programming. Release the transducers by removing the spring-loaded screws.


U1000

Attach the electronic leads to the the guide rail.


U1000

Snap the electronic head to the guide rail. Finished.